Reinhard Budde

We have ~80 relevant sonar alerts, that should be analysed. There is NO security alert, that must be worked on immediately. A lot of alerts should be ignored explicitly (complaints...

The following program executes the show text not only when pressing button A (as expected), but also when pressing button B. Reproducable on browserstack. The program works on laptops. ![2022-08-25...

This error occurs on my tablet, not on my laptop: Clicking the blue obstacle lets it vanish immediately. Other similiar errors occur when creating and moving obstacles. Hope, that it...

take a "drive at speed: distance:" - block. if the block is deacctivated as a whole, everything is fine. if the speed component, say "30", is deactivated, the generated programs...

- the increment block is implemented as an expression instead of a statement. This is bad design. As a consequence the debugger stepper does not stop. Changes have consequences for...

Renaming of a neuron is done in the xNN tab. If the renamed neuron is used in the blockly program, then after switching to the program tab the name change...

Integrate nano33ble

1

the Nano 33 BLE should be supported by the lab. As it is a bit different from other arduinos with builtin sensors, it should NOT be in the arduino group...

increase sw quality. Remove a lot of irritation. Steps: - extend BlocklyBlockProperties.make by the data from BlocklyComment (a few places only) - remove Jaxb2Ast.extractComment(block)) - there re about 200 places...

Use the following program  - open the sim - show the robot, move it to the left - close the sim - change the port to...

Provision of a block (exclusively for simulation) that resets the robot to its original position. This would allow the robot to be used in the simulation to execute tasks multiple...