randyh62

Hi sunhao-seu, I will look into the issue to see what might be going on. In the mean time feel free to say how the tutorial should be optimized. Thanks,...

In your prior post you pointed to the 2020.2 docs but said you were using the 2020.1 release. The tutorial is specific to the release. Was this the problem you...

I have tested it and it took about 15 minutes to complete the hw_emu run as you can see from the attached screenshot. The build itself took one hour 8...

Since you are new to Vitis, perhaps you could start with the https://github.com/Xilinx/Vitis-Tutorials/tree/2021.2/Getting_Started/Vitis tutorial? Focusing on the U200 for the Data Center acceleration card. See if you can get the...

Hello @chenguoping76, Can you clarify what you are looking for here? The _make xclbin_ command can be used with _make xclbin DEVICE=XXX_ if you are specifying a new platform. As...

Hello @chenguoping76, you could try the tutorial with the zc706 platform and see how it works out. You can specify the device in the make command: **make run TARGET=sw_emu DEVICE=xilinx_zc706_base_202210_1**...

I would suggest you work with a standard platform to understand the tutorial and the tools, and then work with your customized platform to see where it varies. You can...

As this is an issue with the custom platform, and not the tutorial, I am closing this issue.

It could be a problem with your setup. Can you provide some additional details with regard to your OS? I just ran hw_emu on the xilinx_u55n_gen3x4_xdma_2_202110_1 and it built an...

This sounds like an environmental issue. The platform requires some common files to be [installed](https://docs.xilinx.com/r/en-US/ug1393-vitis-application-acceleration/Installing-Embedded-Platforms?tocId=pm5zCNChp993ACN_ICPFPg) for the XRT runtime. These files can be found in the [Embedded Platforms](https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-platforms/2021-2.html) download page....