rameau-fr

Thank you very much for your interest in this toolbox. I have a few questions regarding your setup: - **Zoom/Focus**: Did you fixed the focus and zoom of Camera 1?...

Thank you very much for sharing all this information with us. I have looked at the pictures you shared, and I might have some comments: - Certain parameters seem to...

My sincere apologies for getting back to you so late. I have been quite busy in the past month due to other responsibilities. In my view, the quality seems acceptable....

Thank you very much for using MC-Calib. Indeed, such a poor reprojection error should not occur. It seems that only some images are "outliers," causing problems during the calibration, and...

Your calibration configuration looks great, but I would probably increase the `min_per_pts` to about 0.4 just to be sure to avoid critical scenarios. Also, I noticed that you generate your...

Hello, Have you regenerated the board using MC-Calib directly? The Calib.io boards are most likely not compatible with the toolbox.

Thank you so much for this valuable feedback @BobbleLaw. We are testing MC-Calib with OpenCV==4.10.0.

Thank you very much for your feedback. Would it be possible to share your calibration results with us so that we can try to analyze and find the source of...

Thank you very much for using MC-Calib; from the plot you shared, it seems that MC-Calib did a great job at calibrating your system if the camera system is indeed...

Thank you very much for the details; the problem is not strictly coming from the calibration itself, but mostly from the 3D reconstruction pipeline you are using, which requires some...