温泉

Results 4 comments of 温泉

Problem: undefined reference to `esp_ipc_call_blocking' when compile default_envs = wifi_s2

Because the firmware in the release was for the ESP32 (more accurately, it should be called the ESP32-S), the ESP32-S2 had a lot of differences from the ESP32, and the...

Problem: undefined reference to `esp_ipc_call_blocking' when compile default_envs = wifi_s2

I followed the documentation to produce this result: ![image](https://github.com/bdring/FluidNC/assets/41329948/ab345ace-8059-447b-a54d-275077052f6c) Now, I modified part of the code to fit ESP32-S2, and I will try to make a PR after test on...

Problem: undefined reference to `esp_ipc_call_blocking' when compile default_envs = wifi_s2

Thanks, Kirizu Laser board is built by myself. I tried to modify the code, but I found that it runs on 2 core, I think it is not suitable to...

Problem: undefined reference to `esp_ipc_call_blocking' when compile default_envs = wifi_s2

Hi, I spent some time to make this firmware to run at ESP32-S3. It's working now, but I haven't tested it on my machine yet. There are my changes: /FluidNC/esp32/PwmPin.cpp...