Rajendra Kumar Thirumurthi

T2: Ifacenaming mode failures with “show ip route <IP>” for v4 or v6.

1

#### Description Ifacenaming mode failures with “show ip route ” for v4 or v6.   “show ip route ” for v4 or v6 is NOT supported in ifacenaming mode in utilities_commom/cli.py...

#### Description Configuring ACL table and associating it with an Ethernet interface, without NameSpace is failing. The issue is specific to Multi NPU/T2 topology. Base configuration is deployed using Minigraph....

Multiasic support for disk/test_disk_exhaustion, Issue# 12419

1

### Description of PR disk/test_disk_exhaustion.py part of test tries to send traffic to validate the data plane during disk exhaustion test. The current code uses dut_host router-mac as destination. For...

T2 disk/test_disk_exhaustion.py multi-asic support

2

**Description** disk/test_disk_exhaustion.py part of test tries to send traffic to validate the data plane during disk exhaustion test. The current code uses dut_host router-mac as destination. For mutli-asic hardware needs...

T2: Mulit-asic support needed for telemetry/test_events , test_telemetry scripts

3

**Description** telemetry/test_events , test_telemetry scripts are failing in multi-asic switches. coniguration and show commands used in the test does not use namespace option associated with the asic. **Steps to reproduce...

Adding additional Ether pkts stats ranges for Cisco Platforms

13

Adding additional Ether Pkts in and out stats ranges requirement for Cisco Platforms. Currently SAI supported attributes are in the range for bigger frames sizes are : 1519-2047, 2048-4095, 4096-9216...

Ignore LA error unsupported operation for poller state 1

5

### Description of PR Log analyzer failure ERR swss#orchagent: :- doCfgSensorsTableTask: ASIC sensors : unsupported operation for poller state 1 in cisco test_platform_overtemp_fault and T1 run, it's a cosmetic issue...

Auto_techsupport.py is failing in multi-asic platforms

5

#### Description auto_techsupport.py is failing for multi-asic platforms, enhancement needed to look platform specific config_db. ## Steps to reproduce the issue Try to do config auto-techsupport root@sfd-vt2-lc0:~# config auto-techsupport global...