raed143

Is this issue is still open? or shall I install multiple boards? (1 for each 2 controllers). If I did. will it be possible to set each board to only...

In my case 2 NSO controllers worked well on one board. So installing 2 boards with a switch to turn on/off the second board solved the problem.You can do 4...

This issue is closed though. Using multiple board solves it 100%.I would recommend just adding the following simple features to completely overcome the few small issues with using multiple board. ...

Yes darthcloud has been one of the biggest contributors for retro gaming. Controller have always been an issue for me. And I hate dongles. I managed to have an internal...

There is only one authorized vendor in Aliexpress called retroscaler. The others just copied the open source instructions to profit out of them.On 1 Feb 2023, at 11:31 PM, anherooftime69...

Yea, as a temporary solution I have installed multiple chips internally and they work fine. If you buy they esp32 chips separately they are cheap around USD 3 each and...

I don’t have pictures with me now but it’s very simple. Each controller has 3 pins, one for power 3.3v, the middle for data and the third is neutral. For...