Richard Antony Burton
Richard Antony Burton
Yes, you can do that. Two roms of 1mb is easy, you only need to link one rom file which can be flashed at any (or multiple) 1mb boundary/ies on...
I have a Connect 3 in my Pulsar and it worked on that when running D554 and since I've updated to D605 it still works. Mine is hardware version 31...
I can point you to a link, but don't want to post it here. Drop me an email at [email protected]
Just to add to this (I know it's closed, but useful info), if you mount a fat32 partition on my head unit all the files are marked as executable! However,...
Sorry I haven't had chance to look at this, I'm not sure which checksum you're referring too. If it's the standard one then it must be right or the esp...
I've never used arduino ide with esp8266, but as it's just c++ using the standard tool chain, with a few libraries tacked on (as far as I understand it), then...
I'm not quite sure what're asking because rBoot itself has no impact on your iram segment or the free ram available to your application. If you're referring to ota code...
Your understanding of the process looks about right. The reason rBoot can't set up the flash mapping is two fold. First off if rBoot enabled it then it would not...
It's so long since I looked at this code I'm struggling to remember what the old code did and so then what new code does! I'm sure this is fine,...
This appears to copy 16 bytes, although the structure is only 9 including the checksum byte we aren't checking. On the other hand, if anyone were to add to the...