rabeno

Hi, From the release page (https://github.com/softwarecrash/Solar2MQTT/releases) it seems that from version 1.0 there was a wiring change, so 1st thing to do is to check if your wiring is correct...

Yes, I have the same problem, but according to this (https://github.com/softwarecrash/Solar2MQTT/issues/72#issuecomment-1935013899), there is nothing to do, since this software cannot translate the numeric value to real temperature.

BTW, I have been investigating this issue myself, and according to the protocol description, the value of the temperature being displayed by this firmware should be divided by 10 in...