Panagiotis Toumpaniaris

Or another int argument with three acceptable values for "normal, quiet, powerfull". One way or another thanks a bunch!

Sorry I've been up to my neck and didn't check in for a while. I'll check it as soon as possible. Just FYI all I have available are basic split...

ok so finally I got around to test it.. ~~It seems to work PERFECTLY !!~~ Kudos !! here's my mysensors sketch on a domoticz controller for reference : https://github.com/ptoump/MyHomeSketches/blob/master/Basement_Room_01/AC_n_TEMP_1.6/AC_n_TEMP_1.6.ino

Sorry , in the end it didn't work properly, I was too happy to notice the difference... anyways, after loosing a few (5-6) hours of sleep I made the following...

Hello @advfr Coincidentally I forked this project on Friday morning and made some changes to make it work with MKE . Haven't tried it yet, but everything should work EXCEPT...

I second the feature request! Doesn't need anything Fancy, since we already have automatic local backups. Just upload the latest with a common filename, and save the timestamp. The periodically...

UPDATE: Solved -- Irrelevant to the software, it was a network issue. > Sorry for resurfacing this, but I have the same issues. > > EVO192 (2.60) with IP100 (5.10.06)...

UPDATE2: Solved -- Irrelevant to the software, it was a network issue. > UPDATE: I used the latest docker version (dev-latest), and set `IO_TIMEOUT = 10`, didn't make any difference..

> 2.60 is too old firmware. True, it's so old actually that I'm afraid to upgrade to be honest 😅 Update: it seems that it was a network problem, there...

> But I doubt that PAI works correctly with firmware version 2.60. It works surprising well actually, integrated on home assistant for basic management and remote alerting.