psxde

+1 at least for not removing existing categories when editing a task

Hi @Titanius, I have bridged the second controller to use directly the GPIO from the ESP. Maybe its possible to control the STM via Wled but I don't have tested...

Hi @numselli, yes it should be possible to completely remove the STM if its bridged.

Found some more information: - https://wled.discourse.group/t/has-anyone-reverse-engineered-how-led-curtain-hooks-work/7423 - https://github.com/Makuna/NeoPixelBus/issues/790 And the idea of using an Attiny 13 to build a replacement for the weird led circuit: https://forum.arduino.cc/t/ws2812-ic-to-drop-led-nodes/1342405 So without doing hardware...

> I have similar set, but that is not the behaviour I see. > > If I just set the led count to double what it should be then all...

I successfully got it working by setting APA106 and the first 20 LEDs as an offset. However, this only worked on one of several ESP32 controllers without interference.

@braicc I've tested it with 0.15.1 and nightly. Controller is GLEDOPTO GL-C-010WL-D (working, newer revision v8?), GL-C-010WL (not working, older revision v3?) Edit: Also having flickering with other LED strips...