pshingala145

hello altishchenko, Thanks for your suggestion. The issue with Downlink(ACK) frequency getting changed all time has been resolved by setting TX WINDOW parameter as RX2 on the LoRaWAN Network server,...

hello, Node uses ABP to join the network. We have tried sending Downlink Messages from Server, but Node Didn't receive it. We could see the Downlink payload at the gateway....

hey @ altishchenko Thanks for the feedback For your reference, I'm attaching one more screenshot from the gateway logs. On the LNS side, I have disabled the Frame counter. Not...

hi, Following is the Downlink Payload that we push to the server. { "data": "4c45445f4f4e", "devaddr": "69E611CE" }

Hi.. I have recently enabled the Frame counter check at LNS to "Reset on Zero" Now, from my firmware, I'm also setting the uint16_t up_counter & down_counter which is incremented...

Hello @altishchenko, The same code and the same node are working with one of our Chinese gateway having the same network configuration. So it should work with the Laird gateway...

Hello, We are using Sentrius RG1xx LoRaWAN gateway with RN2903A(US) LoRaWAN modules mounted on IMP006 Board and Gotthardp LoRaWAN Network server. Moreover, we send Confirm up-link messages to LoRaWAN network...

@mcoracin When We try the same setup with another gateway node always get ACK as well as Downlink Payload. Receiving window Parameters are in concordance with the server configuration. The...