profroyk

I have the same problem w/ and ESP-12 and tried several of the 3.2 releases. It looks like the flash worked, the LED blinks about 1/second but there is no...

Thanks. That did the trick for logging. It's the same error over and over. 2nd boot version : 1.6 SPI Speed : 40MHz SPI Mode : QIO SPI Flash Size...

I'll try it when I get home tonight but are those addresses correct? They are both the same address so wouldn't esp_init_data_default overwrite blank.bin? Roy On Tue, Apr 5, 2022...

Thanks. I put the esp_init_data_defaults at 0x80000. It didn't make any difference - Same problem. Here's a snippet of the console log: 2nd boot version : 1.6 SPI Speed :...

Breakthrough. I flashed user2.bin to 81000 and esp-link was able to boot to user2.bin. I can connect to the ESP_DE9E00B network (but not every time) but now I'm running into...

I have success. I can connect to my home ssid. I have an ip address. I think I'm good to go forward now. Here's what it took: o The python...

Sorry. I haven't returned to this test app. If you are asking a general question - does the debugger hang on the first instruction. I've seen many cases where the...