prmfeddema

Hi - no problem - i will share the details tomorrow. If needed i can also provide my phone number (a conversation is always easier).Regards,PascalVerstuurd vanaf mijn iPadOp 2 feb....

Good morning, I promised to send my conf yesterday - here it is (one day late - sorry). i assume that you already managed to connect your nefit easy to...

Goedemiddag Arjan, Ik ben weer in de lucht - email komt er aan :-) Groet, Pascal Op za 4 feb. 2023 om 13:33 schreef arjanvdnoort ***@***.***>: > Thank you very...

Hi have the same here. Whatever i do it keeps dropping off after starting it. Any help would be appreciated. Z2M version: 1.40.0-1 SLZB06M firmware versions: Core: 2.5.2 Zigbee coordinator:...

After deleting the coordinator_backup.json i now have the following error / log file: [13:16:15] INFO: Preparing to start... [13:16:16] INFO: Socat not enabled [13:16:18] INFO: Starting Zigbee2MQTT... Starting Zigbee2MQTT without...

Next step: hook it up to a usb port instead of ethernet to see if things improve

Confirming that the slzb-06m works fine when connected to usb. So this reboot/zigbee failure only seems to happen when connected through ethernet (no poe - usb powered for test purposes)....

Hi, I have 2.5.2 installed. In my case it disconnects immediately. Kind regards, Pascal Op do 5 sep 2024 om 11:26 schreef Shay Levy ***@***.***>: > Confirming that the slzb-06m...

Log files from both HA as well as the SLZB-06m. Note that i have now connected the SLZB-06m to a POE switch - just to eliminate any potential power supply...

Further testing shows that this only happens when using the latest zigbee coordinator firmware (with ember). When Reverting back to version 20240330 and setting ezsp things seem to work fine.