Prince George

Enhance pcieutil to check actual presence of pcie device

1

pcieutil checks the sysfs entry to conclude if a pcie device is present or not. The sysfs entry won't be updated for non-hotplug pcie device if say, a downstream port...

Sfputil crashes while checking is_rj45_port_from_api()

3

#### Description If the optics is NOT present, the API is crashing ``` ## Steps to reproduce the issue root@str2-7260cx3-acs-12:~# sfputil show eeprom -d Traceback (most recent call last): File...

Arista 7060X6 Sfputil reset does not reset the optics

2

Please validate the behavior of 1. By default if Xcvrd is not coming up, the module must remain in Low power mode 2. If the module datapath are activated, Sfputil...

Fix optoe's write_max when using native i2c driver

3

Optoe driver with write-max > 1 when using the i2c message buffer was allocating only 3(1+2) bytes which means while copying the user data for i2c adapters supporting the native...

Refactor ledd daemon and fix high CPU usage due to unexpected socket …

3

…close #### Description [ledd] Refactor ledd daemon and fix high CPU usage due to unexpected redis DB socket close #### Motivation and Context For unkown reason if redis closes the...

[7060-X6] Port LEDs are not glowing green when port is UP

5

SONiC version is 202311. 1. May I know if 7060-X6 has the necessary driver to support port LEDs 2. None of the port LEDs are glowing green even though the...

[LPO] Added support for serdes Tx/Rx polarity settings

12

**What I did** [LPO] Added support for serdes Tx/Rx polarity settings **Why I did it** To set the polarity for Tx and Rx serdes lanes as needed for LPO optics...

Delay DOM polling until all ports are initialized

15

#### Description Delay DOM polling until all ports are initialized #### Motivation and Context Platforms with large radix like 512 ports may take more time to initialize and complete the...