praveenramoorthy comments

Results 11 comments of


                                            praveenramoorthy

Nxos User Module Issue

@feisa seems you are using user module on MDS switch. One of the show commands used by this module was not giving a valid json output and hence the issue....

cisco.nxos.nxos_install_os fails with issu parameter set to 'yes'

@boleslawlucjanek @YooBZH - I was able to repro this issue on N9K-C93180YC-EX. Checking on this. Thanks.

cisco.nxos.nxos_l2_interfaces fails when unrelated interface is mode private-vlan promiscuous or private-vlan host

@NilashishC you need to enable "feature private-plan" for private vlan mode.

when the `state` is `overridden` in the `dcnm_interface` module, default policy of `leaf` should be trunk

Fixed as part of #287

Module dcnm_vrf clears unsupported VRF Template properties

@steele-ntwrk "route_map_out" parameter is not supported in vrf lite config as of now. and the behavior you are seeing is expected. We will try to support it in a future...

Add support for creating VPC pair

Feature added as part #273

dcnm_network requires ports attribute when attaching to switch

@gve-vse-tim Thanks for raising this SR. Port is a mandatory attribute, but you can have an empty list for that attribute. ```yaml - name: Create a Network and Attach to...

can't create a vrf in NDFC

@sissi48 Thanks for raising this SR. Will check and fix this issue.

@sissi48 I tried to recreate this issue with the same playbook in my setup without any success. Logs for these run can be found in this gist (https://gist.github.com/praveenramoorthy/944437bacf55bf8c473994143d762481). May be...