poundy

can't really help with WT32-SC01 (don't have one) but I do note that the other person commenting here does take sponsorships to publish devices... see their github https://github.com/richardklingler/esphome/

Now you got me looking though. Where did you get the 4" version from? I can't seem to find one. I've played a bit with ILI9341 displays in the past,...

all the code in esphome hard-codes the display sizes to 320x240 resolutions. This means at a minimum you would need to revise that to be able to use the extra...

What would be great is for anyone following along here and who has one of these 320x480 displays to thoroughly test out the ILI9341 2.4" option within esphome and report...

Hardware arrived. Can't repro the semi-working experience @dwaterford75 had - any chance you can dig out pins and setup that you tested this with? I've started looking at code. Any...

@Coolie1101 I think your problem has given me a slightly different angle on how to potentially address this request... There seems to be two significant barriers. First, the ST7789V code...

I didn't look at the thread in much depth, but for a start I'd be looking at width and height params and seeing how they're used. More than that, and...

@dwaterford75 no I haven't tested anything. From your comment above, it seems the WT32-SC01's controller chip most closely matches the ili9341 and I'd agree that's the most promising area to...

This one I think I would like to put as a future improvement - so that the return from the get-* was a little clearer. Some of my use-cases are...

I'd agree that IPv6 doesn't seem to be a priority for many of us in the world, but sometime it will need to be..... and while I don't use it...