possumbytes

Thank you for your reply! Answer to question 1: I don't recall why I chose the RUI3 variant. There are a lot of resources for LoRa tech pointing in a...

Very helpful info on the LoRa product space, thank you! I did quite a bit of research before buying but was not aware of this. There are so many LoRa...

PS: the RX output file I included last still had the #include line in it from my BLE test. Attached output has this removed and so represents a build of...

I did try reversing HW roles, no luck. When you say erase/reinstall RUI3, I assume you mean the bootloader. I have some questions on that. Q1) The [latest release page](https://github.com/RAKWireless/WisBlock/tree/master/bootloader/RAK4630/Latest),...

Ok, I started from scratch, erased, and flashed wiscore_rak4631_board_bootloader-0.4.3.hex and s140_nrf52_6.1.1_softdevice.hex. This recovered the devices, thanks!!! Commands used and output follow. I'm assuming the "probes not supported" line is irrelevant...

Another thought: I may be operating under a false assumption. My understanding of the RUI3 variant was that the only user control was via the serial AT interface and that,...

Thanks for the update. I flashed the RUI3 files you referenced above. The red LED on the module now flashes pretty fast and the module appears to reset about every...

Alright bud, thank you so much for your help so far, but I'm still getting nowhere. After quite a shipping delay, I now have two new board sets (not RUI3...

Per WisBlock_P2P_V1.0.0.uf2 test: I did this without removing the existing CURRENT.UF2 file - is this correct? If not, let me know and I'll retest. Results: Module 1 (TX): on power,...

Alright, thanks. I'd love to know why the other code doesn't work. Pretty frustrating that it works for you but not here, but whatever...I can now move forward. I'll mark...