Tomasz Zieliński
Tomasz Zieliński
> Sorry, what is wrong with docs? Bellow statements is miss leading, **Arduino Nano ATmega328 has on-board debug probe and IS READY for debugging. You don’t need to use/buy external...
Any update on that ? had the same issue.
> `set pid_process_denom = 4` is setting the PID rate to one quarter on the gyro rate, so you’re getting what you asked for. Try setting it to `2`. check...
what is even strange is that pid_process_denom = 4 is not part of custom settings for this FC https://raw.githubusercontent.com/betaflight/unified-targets/master/configs/default/HGLR-HGLRCF411.config
why its closed
But sometimes it does ... so it is not permanent bug, are You sure that Kernel 4.7.4 will solve this issue ?
> Do you mean some OSD element or LUA warning? Yes, same like you can change PID settings
Just a menu for BBL management, that will allow to display how much space on flash memory left free / how much is already occupied , and also initiate flash...
@haslinghuis do you think is that doable i need future ? when i pid tune my quads its common for me to forget clear old bbl logs, so i have...
Same story for 5in1 HDzero board.. disconnect every 3-5 seconds. Tested ELRS 3.5.1 and 3.5.2 firmware on my TX, 250 and 500 HZ, BetaFlight 4.4 and 4.5 but that didn't...