A_Ponzano
A_Ponzano
> the minimum iac value is near zero because i adjust the throttle stop screw in a way that wen the engine is warm and with no load the value...
@GPSFan yes it was taken from an iPhone Is there any particular way or method for me to take the log or do I just copy the serial output from...
[Rak12500_LOG.txt](https://github.com/meshtastic/firmware/files/15239868/Rak12500_LOG.txt)
> That log is ok, but there are no position updates, let it go for 10-15 min or so. Seems like ctrl-c ctrl-v betrayed me and I forgot to check...
[Rak12500_LOG.txt](https://github.com/meshtastic/firmware/files/15240962/Rak12500_LOG.txt)
> Next thing to try is an android device connected to the node and see what it says. This will tell us whether it is the firmware of the app....
Any ideas about the flag's mismatch thing? Could that be an app issue too?
I don't think the android app shows the heading, or at least I can't find it 😅 Maybe @garthvh could help us understand if this issues could be app related?
@GPSFan good point, I'll try setting my phone to imperial unit to see if the heading value is affected