poky

Use 200MHz RTL8722DM?

3

Hi, I'm wondering what's the requirement spec for the Speeduino mcu? I came cross to this Realtek RTL8722DM board, spec as following: https://www.amebaiot.com/en/amebad/#rtk_amb21 ARMv8M Real-M300 Cortex-M33 compatible MCU @ 200MHz...

Hi, I'm trying to get this display to run, so I used the example code here: https://github.com/moononournation/Arduino_GFX/blob/87193ecf7acf4ad093ee1ab2b20431db0d4d10f8/examples/PDQgraphicstest/PDQgraphicstest.ino#L140 Unfortunately, it's non-runner, so I've found the sch, the pins are different, could...

espnow_deinit example request

10

Hi, I'd like to call the espnow_deinit() to release the resources once I'm done with the protocol Do you have a working example to show how it can be done?...

provisioning example problem

1

Hi, I have problem trying the provisioning example, the initiator works fine and able to retrieve the ssid/pass from the responder for the first 3 tries (manually resets for the...

OTA Initator connected to AP with different channel

3

Hi, I'm trying to play with the OTA example, however, I've found that if the OTA initator is connected to an AP with other channels than default, the responders will...

Hi, I have passphrase set on my private key, is there anyway that I can input the passphrase somewhere? Thanks!

Hi, I really like this project! Just wondering if the ocelot also open source like NO2C and UA4C with the Kicad and BOM list? Cheers!