Balázs Póka

Scrape timeout with many disks

4

I manage a Linux box with around 20-25 HDDs. Some of these disks are faster to reply to smartctl, others are pretty slow, taking around 1-2 seconds. Setting the scrape...

Use worker pool for smartctl

4

Use worker pool to make running of smartctl parallel (for issue #197).

Why are UIDs included as a label?

2

If I understand it correctly, UIDs in libreswan are generated dynamically and are always changing. If this is true, including UIDs in metrics, like this: ``` ipsec_child_sa_state{ike_sa_local_host="xxxx",ike_sa_local_id="",ike_sa_name="xxxx",ike_sa_remote_host="xxxx",ike_sa_remote_id="",ike_sa_remote_identity="",ike_sa_uid="2970",ike_sa_version="1",ike_sa_vips="",local_ts="xxxx",mode="TUNNEL",name="xxxx",protocol="ESP",remote_ts="xxxx",reqid="",uid="2961"} 17 ipsec_child_sa_bytes_out{ike_sa_local_host="xxxx",ike_sa_local_id="",ike_sa_name="xxxx",ike_sa_remote_host="xxxx",ike_sa_remote_id="",ike_sa_remote_identity="",ike_sa_uid="2970",ike_sa_version="1",ike_sa_vips="",local_ts="xxxx",mode="TUNNEL",name="xxxx",protocol="ESP",remote_ts="xxxx",reqid="",uid="2961"} 4096...

not all tunnels are reported

2

We have a quite complicated setup, with multiple tunnels per tunnel endpoint pair. Our own subnet is always the same, but the other subnet is unique (of course, otherwise the...