plampix

[BUG] Emergency parser not active when using meatpack

1

### Did you test the latest `bugfix-2.1.x` code? No, but I will test it now! ### Bug Description When using meatpack via Octoprint, emergency commands are sent over serial, but...

Uploading disabled without port selection

5

**Is your feature request related to a problem? Please describe.** Compiling a project for a Digispark works great, however, uploading doesn't work (it doesn't do anything if I hit upload)....

Please add a feature to save/restore EEPROM settings to the flash dialog

2

Over at https://github.com/prusa3d/Prusa-Firmware/pull/3957 @wavexx mentioned there are tools to save/restore the EEPROM settings stored in your printer in case you would like to experiment/help with newer firmwares, and need a...

Resolving 193.172.6.10 results in the following error: Use of uninitialized value $type in string eq at /usr/local/src/jdresolve/jdresolve line 750, line 1. Use of uninitialized value $query in exists at /usr/local/src/jdresolve/jdresolve...

No RFLink-ESP Settings tab

3

Hi, Whatever I do, I cannot find the RFLink-ESP Settings tab, so I cannot configure the MQTT settings. I'm using version 2.6.3 of the Arduino core, and everything else (Wifi,...

Fix escaping of regexps

1

This solves issue #1

Improvement: Only send datapoint when data changed

1

Hi, Thanks for this great plugin, it helped me debug an issue with my thermistor (sometimes reported a too low temp, caused a smoke alarm to go off). I'd like...

Unable to paint logo on part.

1

### Description of the bug On the design from https://www.printables.com/model/772340-mega-deck-box-9-decks I'm unable to MMU-paint (smart filll) the logo and text of the lid. Painting anything outside of the logo and...

### Did you test the latest `bugfix-2.1.x` code? Yes, and the problem still exists. ### Bug Description It's not possible to build Marlin for STM32F070RB_malyan with INPUT_SHAPING_X/INPUT_SHAPING_Y (and probably Z...