Peter Lambrechtsen

BLE GATT UUID for Temperature?

2

Hi I was using a BLE scanning app to monitor the custom firmware and it didn't detect the temp correctly. It seems the UUID assigned is 2A1F but I think...

I am trying to figure out how the HDX Tags are calculated on the Pet Door, have some example tags with their HDX values on the left, and the hex...

The RSSI values are reported every hour by the hub, not sure how they are calculated: Device 1 = 55, Device 2 = 71, then 6 for 6 bytes, and...

Calculating values for CRC and missing xor key values

2

Currently with the decoded payload there is a check digit I don't know how it is calculated. Also I am not sure what byte 3 and 5 are of the...

Support for JWTs signed by private keys

4

I would like to see the ability to create signed JWTs as part of an OAuth flow using a Private Key instead of a shared secret. There is already a...

Horizontal bar supporting stacked graphs

1

Currently you can have a stacked bar graph vertically, but when you try it using the horizontal bar you just end up with multiple items in the chart rather than...

Stubbing "peripheral register not supported"

1

I'm trying to decompile / simulate a PIC32MX695 and it seems to semi-start but because the peripheral which I expect it is looking for a MRF24J40MA isn't connected. I commented...

Beacon and reply

1

With my feeder associated to my hub when the feeder boots I see a standard Beacon request directly to my hub then association request. So I assume your door hasn't...

An B2C Sample with some dependent but it sits along and doesn't have any dependant base poliicy - The preferred_username aka the email address of the user in Entra ID...

Fix up LDIF_LINE_LENGTH as per issue #950

1

As per issue #950 the parameter `LDIF_LINE_LENGTH` doesn't work as it is global rather than in the `operation_to_ldif` funcion.