piste2750

I believe this doesn't depend on the drive but depends on the version of LTFS. Which LTFS version are you using on `/ltfs`? From the log of `ltfs_ordered_copy`, it doesn't...

I would like to check the LTFS returns VEA correctly. Could you try the commands below against a source file ? Linux: ``` attr -g ltfs.volumeUUID [srcfile] attr -g ltfs.partition...

Thank you for your investigation. And it is interesting... I confirmed the functions you pointed out was obsoleting from v0.4. So it is a time to with to new functions...

> Thank you for your investigation. And it is interesting... > > I confirmed the functions you pointed out was obsoleting from v0.4. So it is a time to with...

In the SCSI spec of IBM LTO drives, sense 5 4a00 is not defined. So I don't know why the drive complains against READPOS command. https://www.ibm.com/support/pages/system/files/inline-files/LTO%20SCSI%20Reference%20(EXTERNAL-18Aug2021)_1.pdf#page505 And the log below...

> I removed the drive serial from the log und replaced it with [REMOVED] because I considered it sensitive information and unneccessary for this technical issue. OK. I got. First...

I recommend to contact the Overland Tandberg technical support and ask what is sense 5/4a00 and what it was reported in `READPOS` even if previous `LOAD` command had `GOOD` response.