phaseloop
phaseloop
### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description **Steps to reproduce:** - create VCarve operation in CAM workbench (probably...
### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description FreeCAD crashes when adding CAM VCarve operation to sufrace from red...
Rework of Vcarve operation to include features mostly available in commercial software of this kind. Those features are used to drastically improve carved surface quality (especially on smaller and less...
- print probable cause of errors in CAM in certain operations - introduce "troubleshooting" feature which prints short troubleshooting manual when unknown CAM error occurs. - Python code formatting in...
Finishing pass logic for Vcarve operation was commented by mistake as it was using old cutting API. Reworked and enabled again.
### Is there an existing issue for this? - [x] I have searched the existing issues ### Problem description Importing and refining STL meshes into FreeCAD shapes/solids gives a really...
### Platform ESP32 ### Description With few bluetooth timing tweaks and migrating to ESP-IDF V5.5 we can cut ESP32 node power usage down to 60 mA and later to 50...
No functional change - just adding some comments and reverting leftovers from connectivity debugging.
### Platform ESP32 ### Description Tracking issue for framework update. ## Reasoning: Due to PlatformIO politics, they support only old Arduino 2.x framework based on ESP-IDF V4 which has many...
Draft - PR during testing and development. Strayed a bit from original PR but in a good direction. This PR solves various issues with NRF52 boards when voltage is below...