pbecchi
pbecchi
I have found problem and solution. Auto telemetry is a continuous stream of 10 bytes messages sent every 36 ms. I was using an Arduino Uno or Mega that are...
Yes, i did......no effect on Arduino Uno results! On Esp32 is not necessary CrC is correct 90% of the time...
Hi Yes it is possible to use an H bridge rather that relay but , since I have no schematic of those, I am afraid you need one of those...
ESP8266 OpenSprinkler has never been tested with use of SD cards. And SPIFFSdfat.h should not be included in compilation! Their should be a parameter SDFAT ,if i recall correctly,that control...
I have checked all #include are commented out ! Are you using the rigth branch? It should be : "For_OS_Bee_2_0..........
Without a display or USB printout info it is almost impossible to help you! Http port is 80 as usual....look at the manual!
There is no fixed HW configuration for my OpenSprinkler Esp8266 code. You can select the components you wish to use! My intention was to have a Wiki where everybody could...
In principle it could be possible, but it is a case I never considered. The code when you compile for Esp8266 substitute all Ethernet library call to WiFi library. It...
It is a long time ago...if i remember, you should set gpio ports on pin.h file!
Yes, thanks, it is what I am doing. I tell where I am: I have made following file modifications or additions ("airframe" stand for the name of the new model....