pFallenAngelq

Hi! As the dumb I am I've shorted J5 with a dead fan (was in my parts bin instead of the recycling bin) and my board is no longer working....

PID autotune doesn't stop heating the bed.

2

Just built a coreXY with a Robin E3 and I've installed a mains heater for the bed with a new known good brand SSR, have changed the values for the...

CR10 (not even a little) Smart screen firmware compatibility issue?

3

I have a CR10 Smart with V2.5 S1 board. Board flashes fine with firmware_CR10Smart_64kBL_DW7.4.7.bin and screen is flashed with dwin_set in CR10SmartDwinTM3D_V8.7z... The issue presents when starting the printer: it...