p3d-dev
p3d-dev
In the meantime the share issue on slicer side is fixed. Sharing to octopod works like a breeze now.
Apparently all the issues are due to coding styles. If a format ing tool is used, then endless discussions about different flavors can be avoided. SwiftFormat is nicely integrated in...
Thanks for taking the time to review the PR.
Unfortunately, it's not possible to have a continuous spiral without any height jump between layers. This is because all slice operations are based on layers, so a continuous spiral doesn't...
Could you please share the stl/obj file, so we can investigate, if/how this can be achieved ?
If you are ok with this, you can send an email to [email protected]
Thanks for sharing the design. The solid fill material is drawn in parallel lines with every layer being 90° rotated against the previous one. In the case as shown above,...
Sorry for the inconvenience and encountering this problem after activating the subscription. Based on your description, we have checked the source code and there are two conditions to keep this...
stale issue. So apparently solved
Hello, thanks for the proposal and no, Print To 3D currently does not offer any CSG operation like cutting. Which kind of cutting would you need ? Cut along a...