outofsight

[Feature Request] Docker image for "bridging"

2

The following guide [Bridge your ZeroTier and local network with a RaspberryPi](https://zerotier.atlassian.net/wiki/spaces/SD/pages/193134593/Bridge+your+ZeroTier+and+local+network+with+a+RaspberryPi) describe an interesting way to access all the devices from remote locations without need to - install ZT...

ResponseErrorLoginRequiredException while calling user.login()

3

Not sure if this a question, an enanchement or a bug. I'm developing a long running service that requires regular access (every 30sec - 5min, to be defined) to a...

y21ga | BFUS | v0.2.2: Continuous "click sound" from the cameras after updates?

8

Installed few Yi Hack cameras (also Dome X) around April 15 (previous firmware). Updated firmware in June. Now, several times a day, these camera start making a "click sound", in...

It is possible to change camera settings via MQTT?

4

It is possible to change camera settings via MQTT? I enabled the MQTT config topic, say `yicamera/yi-cam-04/config`. I publish (from MQTT Explorer) `yes` under the topic like `yicamera/yi-cam-04/config/camera/LED` but nothing...

Camera settings not applied after /cgi-bin/camera_settings.sh?conf=value

2

After changing a camera setting with the api `/cgi-bin/camera_settings.sh?conf=value`, for example after a `GET` to turn off the led at the endpoint `http://{{address}}:8080/cgi-bin/camera_settings.sh?LED=no`, the setting is not immediately applied. I...

MQTT Human Detection Issue

1

Hello, Using Allwinner with Yi Dome X ``` Firmware Version | 0.2.9 Base Version | 8.1.0.0A_202001211401 Model Suffix | y30qa Serial Number | BFUS ``` Despite having configured MQTT and...

I think it would be nice to have the option to set a (custom) "job" and "instance" label (and maybe other) to logs sent to Loki to easily distinguish from...

Building issue

3

I'm trying to setup a building environment in docker container and build flux REPL but unfortunately I'm not succeding because I'm unable to fully understand the preocess and the dependency....

For example USW Insights, Data Transfer chart show no data when time range is 2 days, but if I change the time range to 1 week suddenly the data appear....

Component prometheus.remote_write apparently use part of resolved endpoint>tls_config>server_name to contact Prometheus API instead of endpoint>url

2

### What's wrong? The component `prometheus.remote_write`, with an endpoint configuration as the following, apparently try to make a post request to `https://portal.domain.tld` instead of `https://prometheus-proxy`: the request fail because DNS...