ouinouin

modbus client, cannot connect on external ip

1

on modbus TCP client, we should be able to choose the IP not from a dropdown list but any IP, since the server we want to poll might be somewhere...

ESP32 EVB from olimex : add default pinout for IR tx and RX

3

**Is your feature request related to a problem? Please describe.** the ESP32-EVB from olimex already has integrated aTX and RX IR LED, TX uses GPIO12 and RX use GPIO39 ,...

UGSplatform wont start under Ubuntu 20.04

10

## Problem description While launching UGS platform under ubtuntu 20.04, i get the following :  the screen locks at this step, and goes no further....

creating a gap breaks the bend on freecad 0.17 body

33

Hi, while bending with no gap from a body (Part design next) : no issues as shown on picture below  while creating a bend...

Sanitize input to skip nulls NaN et al

2

Hi, Thanks for this palette i use on a daily basis ans simplifies a lot the logging of PLC while sitting in front of industrial systems :-). I often have...

jiabaida bms , bluetooth not able to connect

1

Hi, im trying to connect to my Jiabaida BMS with JKBMS, unfortunately there seems to be differences with UUIDS or notify mecanism. while running the command i get : jkbms...

Hi , owning actually a superwatt inverter, having a 1V offset, i m on my way to correct that, unfortunately, the commands PBAT 0 1 2 to correct those issues...

update Buttons relays switches description

1

For the ESP_32 section, the relays switches buttons descritpion was incomplete, added descrption for _d (pulldown) _i (inverted active high) , _n (no pullup) taking reference the related esp8266 peripheral...

Add extra explanations to select the correct variant of GPIO , to let user decipher what Button_in Switch_d Switch_n ... means.

Pressure_Kpa should be a field and not a tag

1

hi, while browsing into the ton of received signals, i could could noctice that for TPMS, the pressure_Kpa (under renault TPMS measurement ) (so the value of the tyre pressure.)...