OpenSource CNC

CAM: MillFace and Pocket fail at correctly recomputing heights when stock height changes

1

### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description When changing the size of the stock (by modifying a feature...

CAM: Helix operation ignores selected geometry when being created

1

### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description When creating a helix, no matter if you have anything selected...

CAM: Pocket operation with more than one base feature goes to origin after each feature is milled

1

### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description When creating a pocket with more than one feature as base...

CAM: Array movement after first operation wrongly represented on screen

1

### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description When making an array, the movement after finishing the base operation...

CAM: Total job time doesn't take into account arrays

2

### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description The total cycle time of a job doesn't take into account...

CAM: Toolpath going over or inside the holes enclosed by the base geometry face

1

### Is there an existing issue for this? - [X] I have searched the existing issues ### Problem description Whenever creating an operation, be it millface, 3d surface or 3d...

Auto Leveler: Freeze when saving the scan, if the Visualizer is open

2

### Version 2.1.17 ### Hardware / Firmware FluidNC ### What happened Whenever I make a scan, when trying to save the result, UGS freezes if I don't close the visualizer...