Omer Kilic
Omer Kilic
@vowstar Any updates on the Linux support?
CC2652 and CC1352 devices are pretty much identical (aside from radios), while chip ID needs some work programming and verification does work fine on CC2652P: ``` $ ./cc2538-bsl.py -p /dev/ttyUSB0...
@wilmardo I need to check but think I had to do a mass erase (via JTAG) before I could program it, those modules might ship with BSL disabled.
Another vote for cc-bsl here On Wed, 25 Nov 2020 at 13:42, George Oikonomou wrote: > cc-bsl sounds good. In the past I have also thought of simple-bsl > >...
With the new name established in #103, it would be great if the PyPi package is updated/renamed once repo is renamed. If you need any volunteers for upkeep etc I...
@sabas1080 It is very likely that the firmware you are flashing has a bootloader configuration that doesn't match your BSL button/pin or trigger level. It could also just be disabled....
@mfaccin See this thread for an interesting idea from TI: https://e2e.ti.com/support/wireless-connectivity/zigbee-and-thread/f/158/t/902829?CC2652R-Jump-to-trigger-ROM-bootloader-from-a-running-program-no-external-GPIO- Essentially: If you have control of the UART pins as GPIO on the host then you might be able...
Any updates on this?
@puddly Happy to contribute to the R&D budget for this exploration, can also send a few of the CC2652R/P sticks if you need spares/test devices?
Windows 11, latest VS Code release. Uninstal and reinstall working here too. Did not work the first time around.