chuctran

I think this project is stopped unlimited?

> Did you try Ctrl+r first? Ctrl+r before press enter iso? I tried but same result 

> So does the 3558 boot to an OS OK. Is it working correctly? Passes a memory test? Boots from a Rufus-prepared USB drive? Since you say the same Ventoy...

https://user-images.githubusercontent.com/39668756/178133121-b34d4645-c3c6-4bcc-a41d-4c93573ece2a.MOV I tried ctrl+r but only isos below 20Mb said error no valid uefi (of course for hdd generation iso legacy) and with iso among 600Mb and up like video...

> So, just to be clear - you can successfully legacy boot to Ventoy and run any ISO on other systems, but if you try to legacy boot from the...

> [#1515 (comment)](https://github.com/ventoy/Ventoy/issues/1515#issuecomment-1114664831) Also the VT command output, see comment a bit further down. P.S. Your pictures show UEFI boot, not legacy boot? Here output from UEFI, and Legacy cant...

> Its rather worrying that you cannot legacy boot to the Ventoy menu system (I presume you can legacy boot the same Ventoy USB drive on a different system?). >...

 Here is vt_efi_dump_rsv_page output I switched to Sony Usb pen drive to test And Plextor 256G covered in HDD Box 3.0, yes I think smt fault with Dell3558

https://user-images.githubusercontent.com/39668756/178159184-f44996f1-3874-44f0-b1f5-eba33cd1bcc7.mp4 I tried with usb2.0 still cant boot Legacy

> smt? Surface Mount Technology component? But you said it boots to Win10 and you can install Win10 using Rufus, so why do you think it has a hardware fault?...