Otso Jousimaa
Otso Jousimaa
Is it ok to use this code or parts of it in BSD-3 licensed project?
Users should be able to check their app .apk against automated builds, similar to https://core.telegram.org/reproducible-builds
Or if multiple data formats are enabled
The voltage can be > 3 V at boot and drop down to ~2.5 V after radio is active. This causes confusion when battery is dying, as the voltage seems...
e.g. data format, transmission interval, PHYs used, channels used.
> Under some circumstances the firmware crashes when NUS and GATT connection were disconnected. I am not sure about these circumstances. I assume it has the cause in the timing....
Possible fixes: - Uninit GPIO on failed init - Configure pull-up / down on GPIO
Firmwares sending data at > 1 Hz rate can lead to mixed order of packets on poor network connections. Having the millisecond precision would solve this issue. This is mostly...