Nico Schiller

Hi, > Despite its high transmit frequency and bandwidth of 15.36MHz, it is approximately 600 μs of the duration makes it difficult to detect such signals in the spectrum. Is...

> From what I have learned, the burst signal of DroneID is not a fixed frequency, it may be constantly changing, and the working channel of DroneID signal is separate...

I’ve had this issue for about 1.5 months. Most of the time, it took two attempts to get past the nozzle-cleaning stage for every print (which is super annoying) —...

So, new firmware (6.3.4), but still no fix to make the nozzle cleaning sequence more reliable? I was able to get it working more reliably after switching the nozzle back...

@Aviian314 The ramming phase between the final unload and a color change differs: during a color change, the nozzle is cooled by 20 °C from the current filament temperature, whereas...