nospam2k

Sorry for delay. Because of the bug I mentioned, I've just setup to reset the ESP8266 until it gets the time as I don't really have time to test it....

Just a comment that this may (did for me) need to be run from administrator console.

> ## upload_script.py > Place this file in same directory as platformio.ini. > > ``` > Import("env") > env.Replace(UPLOADCMD="curl -v -F image=@$SOURCE $UPLOAD_PORT") > ``` I'm getting Update error: ERROR[10]:...

I found why I'm getting the error and want to offer some addition to joba-1's example script for uploading either firmware or SPIFFS filesystem. The key is replacing "image" with...

I'm using both the defaults for hostap and your driver. hostap.conf ------------ interface=wlan0 hw_mode=g channel=7 wmm_enabled=0 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP ssid=homectl2 wpa_passphrase=******** edit_options.sh --------------- options 8814au rtw_drv_log_level=0...

Wow! All this time I thought my 3b+'s were 32bit! Thanks. I'm going out of town for a few weeks, but I'll pick up on it when I get back...

Ok, seems to be working ok. I install 64bit ;) I didn't wholly follow the hostapd as I'm not bridging but tried to use you example AMAP. I am having...

I think I might have found the source of the problem. ``` /var/log/daemon.log:Jul 5 09:35:44 homectl dhcpcd[435]: wlan0: starting wpa_supplicant /var/log/daemon.log:Jul 5 09:35:44 homectl dhcpcd-run-hooks[456]: wlan0: starting wpa_supplicant /var/log/daemon.log:Jul 5...

Ok further testing. Cold boot doesn't get an ip and ends up locking up the rPi after a few minutes so disabling ipV6 didn't help. No kbd response on the...

iw dev phy#0 Interface wlan0 ifindex 3 wdev 0x1 addr 00:13:ef:4f:05:92 ssid homectl type AP txpower 20.00 dBm That is the same whether or not it's cold or warm boot....