nitro2k01

Personal preference would be make it accessible without keyboard because I use Renoise and would prefer to have keyboard enabled unchecked for the most part.

Autodesk Fusion 360 Version: 2.0.10564 Wine version: wine-6.15 (Staging) System: Lenovo Thinkpad T450s Graphics card model: Intel Corporation HD Graphics 5500 (rev 09) Graphics card driver: Unsure what to look...

The site is still up here: http://privat.bahnhof.se/wb800787/gb/

About two years go, I spoke to Bit 9 who reverse engineered schematic and board layouts for the DMG mainboard, and he said it would be ok to share his...

That's the MGB schematic (Gameboy Pocket). The CPU has a different pinout from DMG. I don't think gekkio has published a schematic for the DMG main board.

I got a response from Bit 9 and he pointed out that the files came with a license (in the DESCRIPTION files). Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 (or later) International License....

That would merely check for the problem, not fix the alignment automatically. Depending on the algorithm for placing floating sections, this could also trigger the assertion far more often than...

> You have to align the containing section in this case. No, the whole point of the FR is to not have to align the containing section. If you align...

> There is intra-section `align`, though. Again, this doesn't fulfill the goal of helping an optimizing section placer. Intra-section `align` is still just `align` with some offset. It gives one...

Keep in mind that one use case for sym files is reverse engineering: iteratively editing the file and reloading the sym file in BGB. Since humans are not as precise...