nilrog

I am interested in this too (also have an Ioniq 5). I found in the Bluelink app you can see the daily energy consumption/average/distance/recuperation, and a total, and a daily...

Yes, you can tell HA which sensors to log to influxdb and you will have your own long-time history available in influxdb. I think a good start would be if...

> tripinfo does not have info on power consumed. That is true in the app I have also (Bluelink). You can only see Time, Distance, Avg.Speed, Top.Speed there. Looking at...

Ok, didn't realize that it existed as a sensor before. The `ama` and `amp` keys seems to be a bit confusing when people look for a way to limit the...

> I've tried sending positive values also, though I fixed it at 1000W. Did not seem to stop the charger, but will try to investigate more. That probably depends on...

No, you should just send what your meter, the one that monitors your grid connection, reports as passing through the grid connection as `pGrid`. The charger will take care of...

Exactly. The charger has all the logic needed. We just need to supply it with the data it needs. Ofc, if you want to keep a buffer of excess PV...

> You see the issue here. I'm sending a `pGrid` value of `-2513W`. Yet it starts to charge with `7.286W` which is way too much. I wonder if they have...

> > only `pGrid` is used for calculations. `pAkku` and `pPv` is only used for "display". > > That would render that function completely useless to me (and probably to...

> Any hints on how to enhance the starting phase with automatic phase switching? We cannot really control much, except continuously sending the available power since the logic is implemented...