nilres
nilres
@jjrv I would also be very interested if there is any maintenance/development ongoing.
I was forced to go with embind directly. And work around the deficiencies it has. What nbind was offering was a great addition but as it seems to be an...
I got the exact same card and tried to plug in into my compute module 4 but upon boot raspbian (32bit) spit out a lot of kernel errors and paniced....
@TheGuyDanish thanks for the info that your card failed the same way. Getting the kernel panic data via a serial console connection was also my idea but yesterday it was...
I found my adapter, I figured out the pinout and got it working so that I have a console on the serial console. I thought I was good to go...
I also tried setting "earlycon=uart8250,mmio32,0xfe215040" in my cmdline.txt and that actually helped to get at least some output from the early boot process but unfortunately the panic was still not...
Got it! Disabling the console=tty parameter in the cmdline leads to a full dump of everything on the serial console. I'm sorry that I spamed this thread. But here is...
What I found: From the stack trace it is obvious that the kernel is currently iterating over the PCIe bus and querys all devices and then asks them for their...