nikifena

The same problem I can't flash my 6FUS camera. The yellow led does not blink at startup. I use 16Gb FAT32 formatted card and both home_h20 and rootfs_h20 files were...

Thanks, Paul. This is the 3D view of the PCB: https://files.fm/u/ymgkky4h I'm a PCB designer so know how to make PCB's. Unfortunately, my programming skills are poor. The differences between...

[JBC_controller.pdf](https://github.com/timothyjager/JBC-Soldering-Controller/files/2855631/JBC_controller.pdf) It's a 3D pdf file. You need to have Adobe Acrobat to view it. PS: I fixed the display issue. It was from a poor display. I tried another...

Thanks. WS2812B as shown.

There is more: The sleep pin /hibernation mode/ turns the heater off. I think it's better to reduce the temperature to some low value. Let's say 150 as the original...

 Seems like the main channel is not powered the same way as the other one. and finally, it takes a little bit more time to heat up the other...

Thanks for the update! I started with the PCB design but I'm busy with some other projects. I hope I will be ready until the end of this year.

No problem, but I prefer to mail or FB... or whatever. Anyway. I will modify my idea for the SCH and I will try to send it here. Thanks

I have AD too and I like it and I use it. So I feel comfortable with it. I'm not fimilar with KiCad, but I can try it in the...

Yeah! something like that. What do you think about adding another soldering iron? this means another as1118 and VN5E010? I can make the PCB design as I told you, but...