nepeee
nepeee
Invisible emotes now seems to be fixed.
I have the same issue on wsl2 but without the cpu usage. The tts command just sits there, doing nothing, no cpu or disk usage then suddenly it starts to...
It is a passible solution to port the Arduino flasher code(https://github.com/fishpepper/CC2510Lib) to the tinyhawk stm32f4xx. Than we can make a permanent mod(connecting some pads) and use the Betaflight Configurator to...
I don't have a S or Freestyle so i can't test the code on them. Note that this code is only experimental, the range is much less than a stock...
You need to use the DGUS SDK: https://community.advi3pp.com/t/resources/25
Yes i think it's passible, the main problem with the telemetry is the low tx power(range) of the cc25xx. Is the Fli10 fw open source ? I will check the...
Sorry i forgot to answer the pairing question. The binding is handled in the main.c line 176-238. The TX sends pairing packets at a fixed channel(13) wheres the first byte...
Have you tried to change the RF standard to ADHDS-2A 1-way as its shown in the manual under the section 9.2 RF Std? Also can you do a range test...
The manual: https://www.horizonhobby.com/pdf/FSY004-Manual.pdf I don't think that you can measure tx power accurately without a direct connection. Some folks that used these type of power meters (or the directly connected...
I have an i6x TX and i can't see any difference between the TinyHawkFlysky and the fs-i6b, fs-ia6, fs-a8s receivers that i own except that the rx voltage and the...