Neil Brookins

OK, I agree. So, there is not a perfect solution. I guess to make the SSID field truly variable length, you'd have to do a copy of the bytes in...

In my automation the action section toggles the camera notifications on. Then the next action in the same automation doesn’t run because of the error. Is this expected behavior? Should...

I’ve run into this too. It causes problems when the failure is minor and non fatal, and the automation then fails to run the next step in a sequence that...

I agree with sjbarkey. However there is a problem. Home assistant just has min and max temperatures for the setpoint. There is no way in HA to designate one of...

please vote for this to be fixed in ha here: https://community.home-assistant.io/t/generic-thermostat-heating-range-and-cooling-range/703169/5?u=neilbrookins

This issue can be fixed in HA. The root cause is a mismatch between how Sensi and HA interpret the meaning of the limits. Please vote for this issue to...

Basically what was happening here is I was trying to raise or lower the limit beyond the HA enforced limits. I didn’t know at the time that’s what was happening...

My router is displaying "ESPSomfyRTS" as expected. Perhaps the issue you described only happens with lan/Ethernet? I'm using wifi.

The tool "uptime robot" is a very popular system for monitoring websites. It defaults to a timeout of 30 seconds and it's configurable in the range of 1 through 60...

This is showing code number 1 for wind detected (Time 22:00) followed by code 0 for wind no longer detected. (Time 22:01)  This is showing the 20-minute Time Gap...