Nebojša Stojiljković

Update: There is one possible workaround: Device seem to be working if I comment out ``` reset-gpios = ; ```

Tried that, same output: ``` [ 90.900000] wilc_sdio mmc0:0001:1 wlan0: INFO [wilc_mgmt_frame_register]Frame registering Frame Type: d0: Boolean: 1 [ 90.910000] wilc_sdio mmc0:0001:1 wlan0: INFO [wilc_mgmt_frame_register]Return since mac is closed [...

Hello, I noticed that sama5d27-som1-ek has strange behavior on startup. EN and RESET pins go up when the power is applied. This actually happens on all GPIO pins that i...

We are using module, not WILC3000 SDIO board. Module is connected to mmc0 interface directly and we also have EN, INT and RESETN lines connected to the PA24, PA25 and...

Well, probably i have the latest one. It was working fine until last obsidian update. Probably i can clone/test from github directly, idk.

Sure, here are two: ```chessboard r1bqkbnr/ppp2ppp/2np4/4p3/3PP3/5N2/PPP2PPP/RNBQKB1R annotations: Af1-b5 Hf1 Ad4-e5 Hd4 ``` and: ```chessboard r1bqkbnr/ppp2ppp/2np4/4p3/3PP3/5N2/PPP2PPP/RNBQKB1Rd annotations: Af81-b5 Hf8 ``` So, nothing complicated.