mxmxmx

is that the hex file from the releases page? or something else? either way, this https://github.com/mxmxmx/O_C seems to be running stable here (using "teensyduino" *1.35*), modulating both cv aux channels...

@altitude909 , thanks for trying. that's pretty much the settings i was using, on both channels. i get the glitch when i compile the code with some recent version of...

hi, yeah, changing the multiplier takes effect only on the next trigger, which for 48/96PPQ. https://github.com/mxmxmx/temps_utile-/blob/master/soft/t_u_REV/APP_CLK.ino#L1078 can't remember whence, tbh, ... or whether I or @jeremybernstein added this.

yeah, not ideal. that's because (as is) the multiplier / scale factor is derived from the quarter notes. the thing needs two clock signals to figure out the speed; it...

hey you probably can save your time ... Raffael / @seismicindustries has redrawn the board, with OLED(s) added. not entirely sure what the status is, but it's almost there, i...

not published yet

Hi I suspect you have set the channel B multiplier (mult/div) to some value > 1 ?

i see. that's an artefact of the multiplier stuff (= internal timer). it can be (mostly) hacked away though (see corresponding [temps utile code](https://github.com/mxmxmx/temps_utile-/commit/e5840b97256541a7a7c26b3f95531f589d8c094b).) i'll see to moving that over...

the burst mode works entirely different in v1.3 see [here](https://github.com/mxmxmx/temps_utile-/releases) and [here](https://github.com/mxmxmx/temps_utile-/wiki/using-temps_utile#burst--burst-generator). ?

... surprised it took 8 years or so for someone to bring it up — anyways, point taken, that wasn't a particularly wise choice naming it like that; I'm just...