mvn23

In some situations, stopping the monitor script does not clean up all of its child processes. On the command line, stopping the script with `ctrl-c` works as expected. If I...

When running either on the command line or through systemd, stopping the monitor by `ctrl-c` or `systemctl stop` does not generate MQTT LWT `offline` messages. The only way I can...

Adding commands to serial data causes problems with native HA integration

3

This was brought to my attention in https://github.com/home-assistant/core/issues/101518. By sending commands (e.g. `SC`) from the ESP firmware to the OpenTherm Gateway directly, some unexpected data is received by Home Assistant....

Add wifi support for ROS 7.13+ devices without a physical wifi radio

1

## Proposed change My CCR2004 has no physical wifi radio, but can manage CAPs through the `wifi` menu. Since ROS 7.13, this is no longer a separate package (only `routeros`...

Incorrect states and errors in log when printer is off

16

## Version of the moonraker integration 1.10.0 ## Describe your setup MainsailOS on Raspberry Pi 4, with a smart switch to control printer power configured as MQTT power device. Both...