muzzy124

same problem with legrand 067773 and 067774 Z2M: 1.35.1-dev commit: [ef84ff8](https://github.com/Koenkk/zigbee2mqtt/commit/ef84ff8) EZSP v7 coordinator (hacked tuya gateway) HA 2023.12.0

I see in the reolink integration docs that: "PTZ left, right, up, down, zoom in and zoom out will continually move the camera in the respective position until the PTZ...

067773 with 3c firmware are still getting Update failed (device did not respond to OTA request) z2m 1.39.0-dev commit: [addc238]

> For each PC in my network, I always add 4 specific routes to the split tunneling configuration: > > 0.0.0.0 10.0.0.0/24 192.168.0.0/16 127.0.0.0/8 correct networks are: 0.0.0.0 10.0.0.0/8 (not...

для быстрого фикса в 2.2.2 можно в 116 строке config_flow.py изменить self._config_entry.source на self.config_entry.source только все равно сенсоры не появляются при таком конфиге: ``` narodmon: devices: - name: "Narodmon" latitude:...

same here with 2,7,0 and after downgrade to 2.6.3 (with lan connected ex-tuya flashed gateway) ``` [2025-12-04 01:08:42] info: z2m: Coordinator firmware version: '{"meta":{"build":0,"ezsp":13,"major":7,"minor":4,"patch":5,"revision":"7.4.5 [GA]","special":0,"type":170},"type":"EmberZNet"}' [2025-12-04 01:08:42] debug: z2m: Zigbee...

it seems that 2.7.0 sets 'ember' adapter type to 'ezsp' in 2.6.3 my config was like ``` serial: port: tcp://10.10.25.39:8888 adapter: ezsp ``` in 2.7.0 it was 'upgraded' to ```...