muranyia

Tabs lost in FF 55

1

I was to migrate/save my tab groups but before that, they have died in my FF 55 (Linux). Once I change the group I have no tabs any more, and...

Please implement geom_wordcloud. Thank you!

Inaccurate calibration

1

I'm trying to calibrate the touchscreen of an HP Pavilion TX1000 with the stylus. When the calibration values are applied (via xinput set-prop), the touchscreen remains inaccurate, and notably, the...

NoteOn with zero velocity are discarded

7

The documentation mentions: *"When sending events through a MIDI output port, or by using the Sanitize() unit, velocities greater than 127 will automatically be reduced to 127, and events with...

Launchpad Pro MK3 needs to be initialized first

1

FYI, the latest version of the Novation Launchpad Pro has Session disabled until DAW mode is initialized. The following sysex needs to be sent to the 3rd Launchpad MIDI port:...

Input buss for midi-control

3

My use case is that I have a control surface (LaunchPad Pro) connected which can act as a grid AND as a keyboard, depending on the mode in use. It...

Can set up 32 patterns only for MIDI control

5

Seems like sequencer64.rc allows only 32 patterns to be associated with MIDI controls. Is there a way to go above this number (say 64 for a 8x8 setup)?

Varisets: clips show up in the wrong set if number of sets are changed

3

Opening a MIDi file with `-o sets=8x8` that was saved with `-o sets=4x8` the sets are restored, but the clips (loops/patterns, whatever we call them) show up in the wrong...

[Feature request] Fullscreen mode

6

By no means to overwhelm you, rather to throw this into the buffer so you can evaluate and eventually prioritize... :) I'm thinking about putting sequencer64 on a dedicated PI...

[feature request] New midi control mod params: Rec Arm, Solo

9

On a rather selfish note, I'd love to be able to send these mods from my shiny new (AKAI APC MINI) control surface: - Arm for Recording - Solo