Oliver Dippel

not realy, but it works on raspberry with gpio's (libgpiod) openFPGALoader -c libgpiod --pins=19:26:13:6 -r -f --unprotect-flash rio_build.bit

same problem (ubuntu: trusty): ``` # /usr/local/bin/openvas_to_report -i /tmp/result.xml -o /tmp/result.xlsx Traceback (most recent call last): File "/usr/local/bin/openvas_to_report", line 9, in load_entry_point('openvas-to-report==1.0.0', 'console_scripts', 'openvas_to_report')() File "/usr/local/lib/python3.4/dist-packages/openvas_to_report-1.0.0-py3.4.egg/openvas_to_report/openvas_to_document.py", line 65, in main...

thanks, i removed the rpm part from the generator, the config examples are only minimal setup's , this will be better in the next version :)

sorry, my experience with lathes is very limited, so many things have not yet been implemented. I'll try to implement it at the weekend thanks for the test code

i have no Discord, sorry. for G96, we 'only' need to feed the 'spindle.0.speed-in' with the encoder RPS (revolutions per second) the problem is to calculate this value. I have...

ok, testrun with your file looks ok, the z-axis movements are dependent on the spindle speed :) . what are the lines for: N13 G28 U0. N14 G28 W0. i...

can you send me your json config ?

sorry, I'm a bit busy at the moment, mostly due to uninitialized pointers or **divisions by 0**

the quadType do only divide the counter by 4 to have the 'normal' resolution like in other software libs. ``` assign pos = $signed(count>>>QUAD_TYPE); ``` if you set it to...

Thanks I use SWS pin for flashing with pl2303hx, why do you ask? do you know the pin assignment of other other test pin's ? https://github.com/multigcs/z03mmc/tree/master/devboard