Goswin von Brederlow

Would it be possible to choose the start shape for division as argument to sphere()? Default could go from pyramid to icosahedron as $fn grows and then sub divide.

The socket monitor will send a disconnect event and the application can remove the DEALER. Isn't that all you need? Edit: sorry, the EVENT_DISCONNECTED only includes the endpoint, which works...

Could you describe how you run TSAN to reproduce this please? I suspect there might be some more data races in the pipes as I see one with ROUTER +...

Most likely your model is made wrong: http://hydraraptor.blogspot.de/2011_02_01_archive.html And imho CAD programs are to blame here. They know what is an inside hole and should correct for facet errors. If...

The CAD program is to blame and here is why: You design a 8 mm hole by telling the CAD program to remove a cylinder with 8 mm diameter. But...

@JohK The CAD program translates the design into STL file. At that point it has to incorporate tolerances and counteract shrinkage due to triangulation. As said above slic3r can not...

The "shrinkage" effect seems to also be larger (or less offset by other errors) the more segments you use. When the CAD program generates a polygon that lies outside the...

@nophead No, it's not. We already mentioned correcting the triangulation in the CAD program. Please read the thread from the start carefully. Polyholes is doing exactly that correction by creating...

The pictures show non-flat layers throughout the object. That's probably not even necessary. Instead print the inside normal with fixed thickness and stairs and all. But then the top fill...

Is there a client that speaks this already?