mrtnkhl
mrtnkhl
### Type of request Bug ### HAOS version Version 9 ### wmbusmeters version edge ### Your message goes here After several hours operating with no issues and reading correct data...
Raspberry Pi Zero 2 W Raspberry Pi OS legacy, 64-bit Cloned this git repo at around UTC 2024-03-15 17:30 Followed the installation instructions on the Github page of this project...
There is currently no audio support planned until reverse engineering and interfacing with the digital bus is fully working. Creating this Issue as a placeholder for possible future work and...
Arduino IDE v2.3.4 (2024-12-03) Board: DOIT ESP32 DEVKITV1 Just cloned the repository today and tried to compile the code. Getting the below listed errors. ``` /Users/user/Documents/Projects/Zehnder/nrf905/nRF905-API/src/nRF905API/fan.cpp: In member function 'size_t...
Often times wiring for the Gira Bus is installed / terminated in metal cabinets (Unterverteilung) which prevent WIFI signals from reaching access points. Space permitting, it might be helpful to...
https://gdoor-org.github.io/documentation/homeassistant.html **Sensor configuration documentation** Correction for typo needed, documentation currently reading: ``` sensors: - platform: serial name: "GDoor" serial_port: /dev/ttyUSB0 # change device if needed baudrate: 115200 ``` Should read...
To mount the gdoor adapter in an electrical panel next to other Gira intercom components, a 3D printed case that fits onto a DIN rail would be great.
It would be great if the firmware could publish it's state via MQTT, possible states could include: - watchdog, timestamp, reset every 60s to know if the unit is still...
For locations that do not allow for serial access to the gdoor ESP32 board, it would be ideal if logs / console would be accessible via the gdoor firmware http...
It would be great if the next HW revision would add a couple LEDs or a RGB LED to indicate system status. Eg to understand if the bus is connected...